This feature can be used to reduce the time taken to transition from one color to another. The Tuner screen will be displayed; default choice is Antenna. Press the button and the Block Movie Rating panel will be displayed. Connecting the Power Cable Connect the power cord to the power cord. This signal is usually or in most cases Spanish language.
Wipe the display with a dry cloth after cleaning. Press the or button to choose from the Off, Low, Medium or Strong setting. Do not place any objects on the top of the product. The Color adjusts the amount of color in the picture. Compliance Caution: Always use a power cable that is properly grounded. Try other codes that may include more functionality. In most cases, the default middle position is correct.
The Tint adjusts the hue of the picture. You could use up to 8 characters; either letters numbers combinations of both. Do not scrape it with any sharp object. We are an industry leaders because of our over 60 years of experience and carry millions of replacement parts and accessories for almost 200 brands of , , , , , , , , and. . Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen.
Length is available up to 10 meters. Also, verify that the power cord is plugged into a correctly grounded electrical outlet or surge protector. Use the or button to adjust the color. The Sharpness adjusts the sharpness of the picture. Press the button to start adjusting the treble and the menu page will disappear and be replaced by a small Treble Indicator Bar, as before, so you can see the treble level between the zero and maximum available levels. Use the or button to adjust the level.
When changing the color will be bright for a second or two and then dim to a lower light level. Please see the table below for the factory preset resolutions. Manufactured under license from Dolby Laboratories. Remember to check the peripherals to pinpoint the source of the failure. The Channel Scan screen will be displayed; default choice is Scan. In the Block Movie Rating panel you can customize the program blocking of the following Movie ratings: G —.
Press the button to start adjusting the brightness and the menu page will disappear and be replaced by a small Brightness Indicator Bar so you can see the brightness level between the minimum and maximum available levels. If the contrast is too low the picture will look washed out and if the contrast is too high you will not be able to see any detail in the bright parts of a picture. The Backlight level does not affect the Brightness black level or Contrast white level of the picture, it adjusts the lamp current and this affects the overall brilliance of the picture. There are 3 options for selecting your programming: a. Press the or button to choose from the Off, Low, Medium or Strong setting. The effect will be seen as sharpening the border between colors.
Press the or button to scroll up or down the channels. To avoid electric shock, avoid handling the power cord during electrical storms. Remote Control Sensor — This is the window through which all of the remote control signals pass to the sensor. Use the or button to adjust the level. Remote Control Sensor — This is the window through which all of the remote control signals pass to the sensor.
Press the button on the remote control to exit and begin watching 5. Fore more information see Section 4. Use this feature to diminish picture artifacts caused by the digitizing of image motion content that may be present in the picture. Vinc Y In Stock 4. Press the button to highlight the Volume selection.
The screen glass is very fragile. Press the button to highlight the color you wish to adjust. Note: Some of the main menu options may have additional submenus, i. The main menu options may very depending on your selected input source. Press the locked or allow unlocked. If your cable or satellite remote uses a 3-digit code Echostar or Dish Network for example , use code 627.