For example, if the frequency is 123. When the scanner finds a to step through the before you press. And, the biggest complaint was no printed manual. This mode sets the algorithm for P25 decode. The default setting is no number tag blank.
Maybe they should've called it Mode-Safe Mode? For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2 color patterns. You can have a maximum of 500 Systems, 1000 Sites, and 25,000 Channels. I have written this manual to keep all of you from giving up hope, loosing you mind, trying to return your scanner, or all of the above. Then connect the other end of the cables together using the null modem adapter. Continue at ' ' below.
Also, you can't even upload the system back to the scanner and have to delete it with the software too. Press twice to delete all characters when editing text. Set Start-up Key allows you to turn on the scanner with the system enabled for scan using the. Adjust Key Beep this setting turns the key beep on or off and adjusts the volume level. Repeater Reverse - allows the scanner to try to switch to the repeater if an input frequency is found. The search bank and the frequency where chain search starts depends on how the scanner was set before you selected chain search mode. Battery Option these settings allow you to turn the battery save option on or off and to set the battery charge time.
You can set up to 10 settings transmit frequency, tone frequencies then select one for standby monitoring. Use a Phillips screwdriver and the supplied screws to attach the clip to the scanner. Even if you don't fill them out, they are a good check list for programming. Programming Conventional Systems To Create a New Conventional System press Menu. Enter the number tag 0-999 Press. No Press to cancel an error or warning message. Cloning to clone copy data from one same scanner to another, use one of the included data cables to connect the two scanners.
Program your talkgroups into channel groups within that system and all talkgroups in the system are available to every site so they don't have to be reprogrammed for each site. Multi-Level Display and Keypad light - makes the display and keypad easy to see with three light levels. Continue at ' ' below. Use the worksheets below to help you plan your systems and groups. Check the laws in your area. Turn to select Tone-Outs in Tone-Out Standby Mode.
Note: No Icon will appear in the display to tell you if the battery save feature is on or off. Handle the scanner carefully: do not drop it. Check the to find all the information necessary to upgrade your firmware. Press 4 to move the cursor to the left when editing text. There are better antennas out there to use than the one that comes with the scanner.
Press to store found tones in Tone-Out Search Mode. Press Func then 0 wx to switch to Weather Scan in Weather Alert Mode. When the transfer is finished, both scanners display a ' Complete' message. Check back often as this document will be updated and revised from time to time. You can also that mods. Enter any 3-digit system number tag then. Dynamic Allocated design matches how radio systems actually work much more closely and make it easier to determine how much memory you have used and how much you have left.
Signal Strength Meter - shows the signal strength for the more powerful transmissions. An overview of the features can also be viewed at my page. Number tags should be viewed with the rest of the channel info so you can just scroll to them. Searching- the process of searching for active frequencies in quick search, service, custom search, Close Call search, Search and Store, or Close Call Auto Store. If you have some stuff that not is listed here you can donate this by. Press and hold to turn continuous Alert Mute on; press to cancel Alert Mute in Any Mode. Press Func then Menu to go to the ' Close Call' menu in Close Call Only Mode.