You can also find other images like images wiring diagram, images parts diagram, images replacement parts, images electrical diagram, images repair manuals, images engine diagram, images engine scheme, images wiring harness, images fuse box, images vacuum diagram, images timing belt, images timing chain, images brakes diagram, images transmission diagram, and images engine problems. Remove the 2 screws from the snubber capacitor on the bus bar unit. Remove 4 screws T20 on the cover plate. Refer to the a frequency converter suspected of being faulty, the fire mode data in the alarm log. Loosen the right cable connector using a hex 5 Remove the 6 screws T20 from the shield.
Before touching any instructions required, for a qualified technician approved potentially live parts of the frequency converter, by Trane to identify faults and perform repairs and wait at least as stated in Table 1. Mounting Plate Unplug all other cables from the power card,. Remove the 2 screws on the frame side. Remove the fans and the fan cover plate. Remove 2 screws T20 from the heat sink fan assembly. The Following any repair to a frequency converter or testing of warning clears when fire mode is removed.
Reinstall in the reverse order. Unplug all other cables from the power card. We think this wiring diagram trane split system graphic could possibly be most trending content once we share it in google plus or facebook. Remove the power card mounting plate with the Remove the inrush card. Reinstall in the reverse order. Press the fan cover plate outwards using a screwdriver. We noticed it from reliable resource.
Remove 5 screws T10 on the Power Card. Remove the 4 screws T20 from the heat sink. Remove the 6 screws on the base plate. Following this procedure ensures that all circuitry in the frequency converter is functioning properly before putting it into operation. Remove the 5 screws T10 for the heat sink.
Reinstall in the reverse order. In testing the phase-to-phase output, both voltage and current are monitored. Mounting Plate Remove the power card cover. Remove the complete terminal plate including Remove the cable connector. Reinstall in the reverse order. Please click next button to view more images.
Reinstall in the reverse order. Press the fan cover plate outwards using a screwdriver. Press and loosen the 2 barbs on the fan. Refer to the Input Incorrect parameter settings. The interface consists of two sections.
Remove 6 screws T20 from the inrush card. Unplug the 3 filter cables from the thyristors using a hex 8 key. The converters, stop and reset are the same key. Use a flat screwdriver to release the retainers and connection terminals. Fan cover plate Cradle Screws Control card Fan assembly Control card mounting plate Illustration 7. Reinstall in the reverse order. Reinstall in the reverse order.
Wiring Diagram Trane Split System -- welcome to our site, this is images about wiring diagram trane split system posted by Alice Ferreira in Wiring category on Mar 16, 2019. This section describes the optional display interfaces Programs the frequency converter. Remove the 4 screws T20 from the filter. Remove the 6 distance bushes. Remove 4 screws T20 from the power card mounting plate. Loosen left cable connector using a hex 8 key. Remove the 4 screws T20 from the power card Remove the 3 filter cables screws using a hex 8 mounting plate.