This is the safety alert symbol. It is not designed for removing materials other than snow. The plug might be fine. Problem Possible Cause Corrective Action The electric starter does not turn electric start only. Replacements may be ordered through the engine manufacturer. Could not get a model off the engine. Keep in touch an let us know how it fires up.
Then put that much oil back in to start with and then check the oil level. Stay behind the handles and away from the discharge opening while operating the machine. I will get this thing fixed and running an then sell it to someone with full disclosure. Figure identifies the location of the model and serial numbers on the product. Allow the engine to cool before storing in any enclosure.
Replace the spark plug if it is pitted, fouled, or cracked. Never allow children to operate the machine. It should be as clean as a whistle. Clean it up and lube where ever it looks like it needs it. Obey all safety messages that follow this symbol to avoid possible injury or death. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. Know how to stop the unit and disengage the controls quickly.
To locate a dealer convenient to you, access our website at www. The impeller can throw stones, toys, and other foreign objects and cause serious personal injury to you or bystanders. Since I have used the unit only once I can not say much about it's longevity, but until now I am very satisfied. Floor surface is protected from gas, oil, rust spots and scratches. Part Number: 70709000 Description: Snow-Jet is specially formulated to solve the age-old problem of snow sticking to snowblowers, shovels, plows and other snow equipment. Your outdoor power equipment was built to be operated according to the rules and instructions for safe operation which are contained in the operator's manual and on the machine itself.
If you can also get the Serial off the machine too, even better as you'll be able to determine the correct model year. Copyright 1997 - 2019 RepairManual. The engine runs, but the machine discharges snow poorly or not at all. Sand affected areas before painting, and use a rust preventative to prevent the metal parts from rusting. Fabric is coated for maximum water resistance. Durable rubber mat is made out of textured recycled materials and has a raised edge to keep melting snow contained, preventing a hazardous slippery floor.
I used 75w-90 Mobil synthetic gear lube in my old Toro. Also very pleased with Jacks quick shipping. If you are unsure whether or not your machine has been converted for high-altitude use, look for the following label Figure. I have used it to clear my driveway for snow depths of 1-12 inches. Adjust the skids and the scraper as needed to compensate for wear. Want to fire it up, however don't have oil capacity or specs for a replacement plug. It is designed primarily for removing snow from paved surfaces, such as driveways and sidewalks, and other surfaces for traffic on residential or commercial properties.
It's very difficult to remove this snow with the tool provided. If possible, run the engine for a few minutes before changing the oil because warm oil flows better and carries more contaminants. Contact an Authorized Service Dealer for assistance. The oil should be 9. Heavy-duty fabric won't shrink or stretch. Had to replace paddles and scraper blade. Adjust the skids and tighten the skid bolts securely; refer to.
Remains flexible down to -4 degrees. Ensure that everyone using this product knows how to use the product and understands the warnings. The only features that it does not have and I miss is variable speed control and the ability to swing the chute from the handle. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. I kept it running and it did a decent job. Figure 10 The machine should move rearward. Now on to the usage of the snow thrower: I had an old Montgomery ward unit with a Tecumseh 2 stroke.
Important: To prevent damaging the electric starter, run it in short cycles 5 seconds on, 5 seconds off , no more than 10 times. You'll work less and your snow equipment will run more efficiently too. Your machine is capable of amputating hands and feet and throwing objects. Note: Do not use synthetic oil. Please be aware that the manufacturer may decide to change these specs at any given time without notice. The Storm 2410 is self-propelled with choice of 6 forward and 2 reverse speeds, giving you control and versatility in winter conditions. Rated 2 out of 5 by Dan the snowman from Disappointed I bought this snow blower two years ago and have used it about six times.