If a call is not retrieved within a specified time, you will hear an alarm as a reminder. Default : No entry Dial 002. Do not bypass this safety feature by tampering with the plug. You can dial the stored number easily. Follow all warnings and instructions marked on the product. Call Forwarding for your receiving group —. These names are displayed when making call with the display operation.
There are flexible feature numbers and fixed feature numbers. Installation must be performed by a qualified professional installer. On the other hand, any extension can set the notifying method, either ring or voice, to receive an intercom call. Confirm the stored parking zone number. Incidence of Harm to the Telephone Lines If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. Tone 1 Tone 2 Tone 3 Tone 4 When going off-hook Dial Tones Tone 1 Normal Tone 2 At least one feature has been changed from the default setting at your extension. The other party is placed on hold.
He can also change their mode if needed. If you are not sure of the type of power supply to your home, consult your dealer or local power company. You can retain the assignment such as an extension number or One-Touch Dialling memory etc. Entering Characters When storing a name or message, enter characters as follows. Enter 1 to deny or 0 to allow. Which way do you prefer to receive an intercom call? The contrast or the volume level and the items will change as follows:.
Check the Troubleshooting section before consulting your dealer. Also used to confirm the information or to call the room. The Wrap-up button light shows the current status as follows: Off: Ready mode Red on: Not Ready mode Flashing red: Wrap-up mode. Operation Flowchart The operations in the shaded areas can be done hands-free. The call is disconnected when the time runs out unless the originating extension returns to the conference.
Find the desired setting and program as necessary. Where are your incoming calls forwarded? Recording a conversation Two-way Record You can record a conversation into a mailbox while talking on the phone. When the time limit passes, it stops automatically. To play back Dial Off-hook. User Manual Charge Used to check the total charge for their own extension.
When you go off-hook to answer, you can hear the alarm tone or the pre-recorded message. It should be programmed through system programming beforehand. Default: Ringing line is selected. Changes in Telephone Company Communications Facilities, Equipment, Operations and Procedures. Also, enebles to change it in manual temporaly. If you store an outside party's number, you should first store a line access number or outside line group access number. Product Service Panasonic Factory Service Centers for this product are listed in the service center directory.
Do not locate this product where the power cord may be stepped on or tripped on. Unplug the product from the wall outlet before cleaning. Do not clean the unit with abrasive powders or with chemical agents such as benzene or thinner. This product should not be placed in a sealed environment unless proper ventilation is provided. Off-hook One of the following. Read and understand all instructions. Directed Call Pickup: Picks up a specified extension's call.
The illustrations may differ from the buttons on your telephone. There are two methods Automatic or Manual to change the time modes. You can use this as one of transferring features. Default: No tone Call waiting tone: a waiting tone through the handset. Some directories can be stored, edited or deleted on your extension. Intercom Alarm Assignment Which type of call waiting for intercom calls do you receive? User Manual Outside Line Intercom 71 and then 0 to 2 as you desire. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface while in use.
While in on-hook Ring Tones The following tones are programmable. Never spill liquid of any kind on or in the product. Cancel Enter 1 to set Enter receiving group or 0 to cancel. This is useful if you want to know who is calling, or who you are calling when making an intercom call using the directory. User Manual Enter 7 5. Do not insert objects of any kind into this product through its slots and openings, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
If you do not have a grounded outlet, please have one installed. Any extensions can check the status of the waiting queue with the Hurry-up button light, and forward the first waiting call in the waiting queue to a pre-set destination manually. These buttons make operations simple. For an intercom call from another extension only Regular Hold Off-hook. You do not need the operator's assistance. Press minute Enter minute 00-59.