Operator manual sokkia set 4e. Sokkia set6 manual 2019-02-02

Operator manual sokkia set 4e Rating: 9,9/10 1536 reviews

SOKKIA CX

operator manual sokkia set 4e

Note: The bubble moves towards a clock- wise-rotated footscrew. Differential positioning - Determines the relative coordinates using two or more receivers that are simultaneously tracking the same satellites. Move to setting-out arc measurement. The plate level is now perpendicular to a line between levelling screws A and B. ~ cover Release button 2 Match the battery guide with the hole in the instrument battery recess.

Next

Operator manual

operator manual sokkia set 4e

As this target is made of paper great care must be taken to prevent it getting wet. This correction is applied in the measurement of horizontal distance and height difference and uses an atmospheric refraction constant of 0. The centre of the reflecting prism is being sighted and the return signal is adequate for measurement. The measurement results are displayed. Sparks could be induced, leading to fire.

Next

Sokkia set6 manual

operator manual sokkia set 4e

Adjust the instrument position on the tribrach to centre the surveying point. . Dust it off with the lens brush first, to remove minute particles. Distance Calculation Formula Distance Calculation Formula; with correction for refraction and earth curvature taken into account. The Z coordinate is found by treating the average value as the instrument station coordinates.

Next

sokkia

operator manual sokkia set 4e

Check the adjustment by rotating the upper part of the instrument. Sight the prism centre again. Use the up and down keys to change the field to a new value. Fl: Off To next page æ ~lb~~. Pressing the trigger key during successive measurement stops the measurement. The vertical angle display mode and angle units are correct.

Next

sokkia

operator manual sokkia set 4e

Checking the returned signal is particularly useful when performing long distance measurements. Note the tilt angle value D, e. However, there is still hope in this digital age ofinternet information sharing, even if you are searching Sokkia Set 3030r Manual for that obscure out-of-printdocument. With continued pressing, you will eventually return back to the top of the menu where you started. Turn the power switch off and re-charge the bat- tery. While pressing {F4} and {B. An optional audio tone is output when the signal strength is adequate.

Next

SOKKIA GSR2600 OPERATION MANUAL Pdf Download.

operator manual sokkia set 4e

If necessary, repeat the adjustment. This display also occurs during measurement when the battery power is low. Parallax can be removed by re-focussing. ~:-:'~-:8 8 8'8 88 8. You also may contact one of the Sokkia subsidiaries listed below.

Next

SOKKIA GSR2600 OPERATION MANUAL Pdf Download.

operator manual sokkia set 4e

Move the prism forward and backward until the setting-out Δ distance is 0m. An arrangement such as that shown below is desirable. Mount the battery in the charger by matching the grooves on the battery with the guides on the charger. Contact your local dealer for the details. To exit, press m, then switch off.

Next

sokkia

operator manual sokkia set 4e

~~~~¡~B æ~N Pressing the above rA keys. Adjust the levelling foot screws to center the survey point in the optical plummet reticle. The instrument's station coordinates and height cannot be changed at this time. Note the tilt angle value A, e. ~ To exit, press m, then switch off.

Next