Before resetting your router to factory defaults, please verify that no passwords work, including the default passwords. However, sometimes, when you have no other way to access your router, this step is necessary. Note: It is worth reading more about and what the risks and considerations are when resetting your router this way, instead of just rebooting it. Step 5: Log in to the router. Step 2: Push the reset button.
In particular, if you cannot log in to your router normally perhaps because you forgot the password , this may be your only recourse. The first benefit is that all the rooms in your house have the same access to the Internet. While the router is on, push and hold the reset button. This may be changed at will by unchecking the corresponding box in the settings. How to reset a router to factory defaults Step 1: Find the reset button.
Continue to push in and hold the reset button for at least 30 seconds. Once the power light stops blinking, the unit has been reset and is ready to use. You will probably need a paper clip to do this, because the button is usually recessed. Reset default settings Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Some Asus routers come with default network names with the name of the manufacturer. Step 4: Reboot the router.
Then your network will not be so easily hacked. We recommend to use a different name because a default name unnecessarily identifies the make of your router, making it easier for attackers to break in. After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. Vendor Documentation Recommendation: Refer to the router's documentation to learn how to fix problems. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
Understanding the issue Resetting a router back to its factory defaults is a drastic measure. Access to the user interface Accessing the user interface is necessary when you want to change the router configuration. Usually this button is located at the back of the router. This site also contains information about the preconfigured of the device. If you want to log in to the user interface, you have to use the preset login data. Resetting the router does not reset the firmware to an earlier version, but it will change all settings back to factory defaults.
. This process usually works for resetting any router to it's factory setting. This step is not mandatory. If you're serious about security on your home network, see our recommendations for the best equipment to use. Step 3: Hold the reset button.
Try to log in to the router. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore. Disconnect the power from the router for a few seconds. When you reconnect the power, the router should reboot. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in. There should be a tiny reset button.
In the bottom part of this website, you will find a manual for accessing the of this router and resetting its. Be sure to update this information if you add or remove devices. Note: If you cannot fix the problem after you follow these instructions, maybe we can help. . .
. . . . . .